Professor

Anditya Rahardianto

AD
2.7
Overall Ratings
Based on 7 Users
Easiness 2.7 / 5 How easy the class is, 1 being extremely difficult and 5 being easy peasy.
Workload 2.4 / 5 How light the workload is, 1 being extremely heavy and 5 being extremely light.
Clarity 2.1 / 5 How clear the professor is, 1 being extremely unclear and 5 being very clear.
Helpfulness 2.9 / 5 How helpful the professor is, 1 being not helpful at all and 5 being extremely helpful.

Reviews (7)

1 of 1
1 of 1
Add your review...
Dec. 18, 2019
Quarter: Fall 2019
Grade: A+

Just a heads up, CH-ENGR-100 is NOT a class taught solely by a single professor. For our quarter, we had around five different professors lecture across the span of ten weeks, each on their own specialty. As such, I will only comment only on the structure of the class and Professor Rahardianto himself.
The major of your grades will be based around two midterms and a single final exam. In between are weekly homework assignments and quizzes in your discussions.
The homework assignments, while not difficult, are in fact time consuming. It would serve you well to invest some time in learning Excel and Matlab in order to simplify your homework and finish it a lot quicker (a lot of people complained about taking 10+ hours to finish the homework, but if you're tech savvy, you can shave that down to 4 hours like me). It's still a time commitment, so make sure to start your homework early.
The quizzes are relatively easy; simply go over the lecture slides for the week before your discussion and look at vocabulary and key equations, and you'll do fine.
The midterms and final are very straightforward and similar to your homework. However, you are required to think critically, as expected of an engineer; the majority of the questions can be easily reasoned through even without prior knowledge, and generous amounts of partial credit is given. As long as you do your homework, and ACTUALLY UNDERSTAND IT, you'll ace every exam.
The lectures themselves vary quite a bit in terms of quality, depending on the lecturing professor. I will only discuss Professor Rahardianto for this review; Professor Rahardianto is a new professor, and thus isn't exactly the best lecturer. However, he is very willing to help his students and provide clarifications, and is empathetic and flexible with assignments. I found his lectures best when you have a laptop on your lap opened to the textbook, which would provide supplementary information while he is lecturing. Don't worry too much about taking notes; he always posts the slides on CCLE afterwards.
Overall, I found this class to be mildly challenging and definitely rewarding. This is basically a required class for all chemical engineers, and does give a good impression of what chemical engineering entails.

Helpful?

2 0 Please log in to provide feedback.
Dec. 15, 2019
Quarter: Fall 2019
Grade: A+

There were actually three professors teaching this class: Cohen, Sautet, and Rahardianto.

Cohen: I’ve heard bad things about him, but he isn’t as bad as they say. His lectures are on the boring side, but they are actually fairly useful. He does have useful things to say that aren’t written on the slides. His test was written well enough, but basic mass balances aren’t too hard to write.

Sautet: His lectures were boring, but they definitely helped digest tricky concepts on introductory thermo. That said, his lectures could be more clear. His test could’ve been written better.

Andi: His lectures were slightly better than the other three. Still boring still, but again, helped us digest concepts and word problems. His assignments and tests were confusing and unclear, but he did end up teaching the hardest section of the class at the end.

Overall, this class was fair. It definitely wasn’t a cakewalk, but the homeworks were very manageable, besides the MATLAB assignment. The MATLAB assignment was far harder than it had to be, but Andi literally gave us the code and answers for two questions. Also, HWs are graded on correctness, so if your numbers are slightly off, you'll lose points. Quizzes usually had a question or two that almost everyone gets wrong; don't sweat it if you get all 3's and 4's out of 5, since this class is curved and quizzes aren't worth too much. I actually did pretty poorly on HWs and quizzes compared to others yet still got an A+.

Tests were similar to the homework, but more extra practice like old exams would’ve been helpful. The lectures rip straight from the textbook, but reading the book beforehand will help. The book can be a pdf or whatever, no need to actually BUY the book.

Class was curved in favor of students. I also got something like 4.5% extra credit too.

Helpful?

1 0 Please log in to provide feedback.
Jan. 7, 2020
Quarter: Fall 2019
Grade: A

The class itself if difficult enough and on top of that the professor really sucked

Helpful?

2 1 Please log in to provide feedback.
Jan. 3, 2018
Quarter: Fall 2017
Grade: N/A

I do not recommend this course. Elective classes should be engaging and interesting - not overwhelming and harder than the required core courses. The workload was ridiculous, which was made up of weekly hw assignments, 2 exams (week 5 and week 9), and a very intensive group project (2-3 people). The exams, by the way, were not easy - MC, T/F, and free response. The group project consisted of 2 presentations (briefing about 10 min, and a final presentation about 20 min), a written report of 20 pages long, and a peer review submission. Do not take this course if you are looking for an interesting and/or easier elective.

Helpful?

0 0 Please log in to provide feedback.
Dec. 21, 2019
Quarter: Fall 2019
Grade: A+

This class seemed to make easy concepts much more complex then they needed to be. At first the mass balances and DOF seem very hard and by the end it you will be able to solve them barely even thinking. The issue is to much junk is included in the power point for lectures, you need to find the bare basic and just learn those few points very well.
The class is taught by three professor (Andi, Cohen, and Sautet) but it doesn't really matter they are all the same, boring power points, fail to test key concepts in meaningful way, and then just make the test like HW problems (So just do the HW really well)
Grading Scheme
Mid 1 20% In week 4
Mid 2 20% In week 7
HW 15% 8 problem sets in total
Quizzes 10% Once a week at start of Discussion
Final 35%
- Note if you get over an 90% on the final you receive an automatic A in the class, class curved to an 83% (fill out teacher Eval. to get the extra credit)
The HW is hard, will take 4-5 hours per week, is graded on correctness and chegg has only wrong answer so don't check online but rather with a friend. If you can solve all the HW problems by yourself then you will do great on all the test.
The quizzes are the hardest part because only 5 questions a week and all conceptual so make sure you memorize key equations and facts from the previous two lectures before the quiz a few missed questions drops grade by a lot.
Midterms and final very similar. Midterms get 2 hours for each, final 3 hours. Each test has a few multiple choice problems at the start like the quiz questions and 3 writing problems on the midterms and 4 on the final. The writing problems are very long and multi part like the HW requiring lots of math. So make sure you are able to not only solve all the HW problems but solve them quickly as many people run out of time on the test before finishing. Know how to use math solver, solve system of equations, and store variables on your calculator will greatly increase your speed on test (Can use graphing calculator at all time). Also know how to read the important graphs.
You most answer all questions on all test if you leave any bank your score will decrease dramatically and will make it very hard to get an A.

Helpful?

0 0 Please log in to provide feedback.
Dec. 24, 2019
Quarter: Fall 2019
Grade: A

Not much to be said really, the class is required and gives a good overview of the field as a whole. As it is for the majority laying down the foundation for future coursework, it can be a little boring/menial but not sure if it would be any better with a different instructor – I recommend going to TA office hours and reading the text. Weekly problem sets, quizzes in discussion and 2 midterms and a final, some (i think around 2.5%) extra credit given.

Helpful?

0 0 Please log in to provide feedback.
CH ENGR 100
Quarter: Fall 2019
Grade: A+
Dec. 18, 2019

Just a heads up, CH-ENGR-100 is NOT a class taught solely by a single professor. For our quarter, we had around five different professors lecture across the span of ten weeks, each on their own specialty. As such, I will only comment only on the structure of the class and Professor Rahardianto himself.
The major of your grades will be based around two midterms and a single final exam. In between are weekly homework assignments and quizzes in your discussions.
The homework assignments, while not difficult, are in fact time consuming. It would serve you well to invest some time in learning Excel and Matlab in order to simplify your homework and finish it a lot quicker (a lot of people complained about taking 10+ hours to finish the homework, but if you're tech savvy, you can shave that down to 4 hours like me). It's still a time commitment, so make sure to start your homework early.
The quizzes are relatively easy; simply go over the lecture slides for the week before your discussion and look at vocabulary and key equations, and you'll do fine.
The midterms and final are very straightforward and similar to your homework. However, you are required to think critically, as expected of an engineer; the majority of the questions can be easily reasoned through even without prior knowledge, and generous amounts of partial credit is given. As long as you do your homework, and ACTUALLY UNDERSTAND IT, you'll ace every exam.
The lectures themselves vary quite a bit in terms of quality, depending on the lecturing professor. I will only discuss Professor Rahardianto for this review; Professor Rahardianto is a new professor, and thus isn't exactly the best lecturer. However, he is very willing to help his students and provide clarifications, and is empathetic and flexible with assignments. I found his lectures best when you have a laptop on your lap opened to the textbook, which would provide supplementary information while he is lecturing. Don't worry too much about taking notes; he always posts the slides on CCLE afterwards.
Overall, I found this class to be mildly challenging and definitely rewarding. This is basically a required class for all chemical engineers, and does give a good impression of what chemical engineering entails.

Helpful?

2 0 Please log in to provide feedback.
CH ENGR 100
Quarter: Fall 2019
Grade: A+
Dec. 15, 2019

There were actually three professors teaching this class: Cohen, Sautet, and Rahardianto.

Cohen: I’ve heard bad things about him, but he isn’t as bad as they say. His lectures are on the boring side, but they are actually fairly useful. He does have useful things to say that aren’t written on the slides. His test was written well enough, but basic mass balances aren’t too hard to write.

Sautet: His lectures were boring, but they definitely helped digest tricky concepts on introductory thermo. That said, his lectures could be more clear. His test could’ve been written better.

Andi: His lectures were slightly better than the other three. Still boring still, but again, helped us digest concepts and word problems. His assignments and tests were confusing and unclear, but he did end up teaching the hardest section of the class at the end.

Overall, this class was fair. It definitely wasn’t a cakewalk, but the homeworks were very manageable, besides the MATLAB assignment. The MATLAB assignment was far harder than it had to be, but Andi literally gave us the code and answers for two questions. Also, HWs are graded on correctness, so if your numbers are slightly off, you'll lose points. Quizzes usually had a question or two that almost everyone gets wrong; don't sweat it if you get all 3's and 4's out of 5, since this class is curved and quizzes aren't worth too much. I actually did pretty poorly on HWs and quizzes compared to others yet still got an A+.

Tests were similar to the homework, but more extra practice like old exams would’ve been helpful. The lectures rip straight from the textbook, but reading the book beforehand will help. The book can be a pdf or whatever, no need to actually BUY the book.

Class was curved in favor of students. I also got something like 4.5% extra credit too.

Helpful?

1 0 Please log in to provide feedback.
CH ENGR 100
Quarter: Fall 2019
Grade: A
Jan. 7, 2020

The class itself if difficult enough and on top of that the professor really sucked

Helpful?

2 1 Please log in to provide feedback.
CH ENGR C121
Quarter: Fall 2017
Grade: N/A
Jan. 3, 2018

I do not recommend this course. Elective classes should be engaging and interesting - not overwhelming and harder than the required core courses. The workload was ridiculous, which was made up of weekly hw assignments, 2 exams (week 5 and week 9), and a very intensive group project (2-3 people). The exams, by the way, were not easy - MC, T/F, and free response. The group project consisted of 2 presentations (briefing about 10 min, and a final presentation about 20 min), a written report of 20 pages long, and a peer review submission. Do not take this course if you are looking for an interesting and/or easier elective.

Helpful?

0 0 Please log in to provide feedback.
CH ENGR 100
Quarter: Fall 2019
Grade: A+
Dec. 21, 2019

This class seemed to make easy concepts much more complex then they needed to be. At first the mass balances and DOF seem very hard and by the end it you will be able to solve them barely even thinking. The issue is to much junk is included in the power point for lectures, you need to find the bare basic and just learn those few points very well.
The class is taught by three professor (Andi, Cohen, and Sautet) but it doesn't really matter they are all the same, boring power points, fail to test key concepts in meaningful way, and then just make the test like HW problems (So just do the HW really well)
Grading Scheme
Mid 1 20% In week 4
Mid 2 20% In week 7
HW 15% 8 problem sets in total
Quizzes 10% Once a week at start of Discussion
Final 35%
- Note if you get over an 90% on the final you receive an automatic A in the class, class curved to an 83% (fill out teacher Eval. to get the extra credit)
The HW is hard, will take 4-5 hours per week, is graded on correctness and chegg has only wrong answer so don't check online but rather with a friend. If you can solve all the HW problems by yourself then you will do great on all the test.
The quizzes are the hardest part because only 5 questions a week and all conceptual so make sure you memorize key equations and facts from the previous two lectures before the quiz a few missed questions drops grade by a lot.
Midterms and final very similar. Midterms get 2 hours for each, final 3 hours. Each test has a few multiple choice problems at the start like the quiz questions and 3 writing problems on the midterms and 4 on the final. The writing problems are very long and multi part like the HW requiring lots of math. So make sure you are able to not only solve all the HW problems but solve them quickly as many people run out of time on the test before finishing. Know how to use math solver, solve system of equations, and store variables on your calculator will greatly increase your speed on test (Can use graphing calculator at all time). Also know how to read the important graphs.
You most answer all questions on all test if you leave any bank your score will decrease dramatically and will make it very hard to get an A.

Helpful?

0 0 Please log in to provide feedback.
CH ENGR 100
Quarter: Fall 2019
Grade: A
Dec. 24, 2019

Not much to be said really, the class is required and gives a good overview of the field as a whole. As it is for the majority laying down the foundation for future coursework, it can be a little boring/menial but not sure if it would be any better with a different instructor – I recommend going to TA office hours and reading the text. Weekly problem sets, quizzes in discussion and 2 midterms and a final, some (i think around 2.5%) extra credit given.

Helpful?

0 0 Please log in to provide feedback.
1 of 1
ADS

Adblock Detected

Bruinwalk is an entirely Daily Bruin-run service brought to you for free. We hate annoying ads just as much as you do, but they help keep our lights on. We promise to keep our ads as relevant for you as possible, so please consider disabling your ad-blocking software while using this site.

Thank you for supporting us!