MECH&AE 103

Elementary Fluid Mechanics

Description: Lecture, four hours; discussion, two hours; outside study, six hours. Requisites: Mathematics 32B, 33A, Physics 1B. Introductory course dealing with application of principles of mechanics to flow of compressible and incompressible fluids. Letter grading.

Units: 4.0
1 of 3
Overall Rating N/A
Easiness N/A/ 5
Clarity N/A/ 5
Workload N/A/ 5
Helpfulness N/A/ 5
Overall Rating N/A
Easiness N/A/ 5
Clarity N/A/ 5
Workload N/A/ 5
Helpfulness N/A/ 5
Overall Rating 3.8
Easiness 2.2/ 5
Clarity 3.6/ 5
Workload 3.4/ 5
Helpfulness 3.6/ 5
Most Helpful Review
Fall 2020 - Looking at the reviews posted so far this quarter, I would say they are accurate to a degree, but may be a little harsh. I did think it was a little petty that he has pasted the entirety of both of the negative bruinwalk reviews written for this quarter in emails addressed to the class, but it is what it is. Anyways, I would agree that he goes over pretty basic derivations of concepts in class and always uses the most simplistic cases that you can think of. While this seems okay at first for the first 2-3 weeks of material, it leaves you pretty unprepared to do the homework and understand the material once you get to the more complicated topics (ESPECIALLY CONTROL VOLUMES). This is also true when he goes over practice midterm/final problems; he always chooses really simplistic questions that don't really reflect the kinds of questions on the actual tests. However, I think that if you attend discussion, you'll be in a much better position to succeed in the class. The TA explains a summary of the material in a concise and easy to understand manner and explains a variety of practice problems very in-depth (honestly maybe a little too in-depth but I'm completely fine with it). The professor still does a sufficient job of at least introducing and explaining the topics so you're in a position to pick up the material quickly during discussion, which is still nice. If you do still need help, I think he's relatively helpful in office hours, and he's always willing to answer questions during class as well. As for the exams, I would say they are not too tough in terms of actual content and length, but echoing the sentiments expressed below, they could definitely have used clearer wording. I thought it was a little unfair, given that most of the time they wouldn't offer clarification even when the wording and diagrams were vague and nearly impossible to understand. Clarifying questions to the professor were often met with one word answers or passive aggressive responses, and I sometimes found myself guessing what the question was asking. Nonetheless, they were 24 hour tests, so time wasn't really an issue, although we were required to submit a video explanation of our answers, which was a little annoying but fair. Overall, the class wasn't bad; I thought the professor did an okay job of getting through the material. He never kept class longer than it needed to be (which I actually respected and appreciated a lot) and was friendly overall (although I do wish he was more open to new genres of music). You shouldn't worry too much about grades; he's actually pretty generous in the end, even if it doesn't always seem that way.
Overall Rating 3.6
Easiness 2.4/ 5
Clarity 3.6/ 5
Workload 3.2/ 5
Helpfulness 3.8/ 5
Most Helpful Review
Fall 2024 - This class has 8 questions. Each is worth 50 points. Two on the first midterm, two on the second midterm, and 4 on the final. And that's the class! There is the added caveat that if you score above a 90 on the final you automatically get an A regardless of midterm grades. But the midterms are far easier than the final, so lock in early and coast. Exams are open-note, open-book, and you can even download the homework solutions to your device - except you absolutely need the textbook to look up formulas, table values, and curves/graphs. THIS IS A CLASS WHERE BUYING AN IPAD IS WORTH IT. Sitting in a shitty lecture hall desk for exams was a pain, and I couldn't imagine having to rifle through a physical textbook to find it. You can have the textbook open on your laptop, but the logistics of juggling your exam, device, and calculator make it all a little tight to add a thick book on top of it all. There are homework assignments, but they aren't graded. Instead, they're a selection of textbook problems that give you practice with the formula and methods. Worked out solutions are available for these as well. Kavehpour himself is mildly terrifying. He has an extremely strict no phone policy, and he'll ask you to either explain why you're on your phone during his class or ask you to leave. He also will interrupt your questions with your peers or ask what you're typing - basically if you're doing anything other than silently and attentively taking notes, he'll get mad at you. On the positive side, he does "phone breaks" - if he wraps up a derivation, he'll give you 2 minutes to use your phone and talk (as well as the obligatory 5-10 minute break halfway through the lecture). He also starts class 10 minutes after the hour, so getting to class shouldn't be an issue. Outside of his character and quirks, he's pretty much exactly what you'd expect from a MIT grad. The lectures for this class can be somewhat overwhelming. It is extremely math heavy, and hinges on your understanding of multivariable calculus. Vectors and vector calculus are critical for modeling how fluids move and behave, and if you want to follow along in lecture it really helps to remember the del operator, flux integrals, partial derivatives, chain rule, etc. Thankfully, none of the actual calculus appears on exams, it's just helpful if you want to understand the formulas you're copying down. In terms of exams, some problems can be solved in less than 5 minutes as long as you know which formulas to use. Control volumes are the bulk of this class, and as long as you make sure to state your assumptions, define your axes, normal vectors, and draw the control volume, you should be good. The last 2 concepts are pipe flow and compressible (gas) flow, and they're more tedious. Having a TI - Nspire or other calculator that can solve algebraic equations makes things a whole lot easier, but in general these types of problems are a bit more computational rather than a lot of theory and a quick plug and chug the way the beginning of the course is. A strong foundation in physics and a conceptual understanding of what's happening makes a big difference when you're identifying the areas of jets, calculating mass flow rates, and doing any of the other fun calculations that appear in this class. The bottom line is, fluid dynamics are pretty cool and Kavehpour makes this class unique but mostly pleasant. He'll tell you exactly what's going to be on the exams, so just do exactly that and you should be in the clear. Even if you're not going on to MAE 150A or anything else fluids, it's a cool class and the things you learn are worth the effort.
Overall Rating N/A
Easiness N/A/ 5
Clarity N/A/ 5
Workload N/A/ 5
Helpfulness N/A/ 5
Overall Rating N/A
Easiness N/A/ 5
Clarity N/A/ 5
Workload N/A/ 5
Helpfulness N/A/ 5
AD
1 of 3

Adblock Detected

Bruinwalk is an entirely Daily Bruin-run service brought to you for free. We hate annoying ads just as much as you do, but they help keep our lights on. We promise to keep our ads as relevant for you as possible, so please consider disabling your ad-blocking software while using this site.

Thank you for supporting us!